EasyManuals Logo
Home>Jungheinrich>Forklifts>ECE 220

Jungheinrich ECE 220 User Manual

Jungheinrich ECE 220
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
D 3
1206.GB
4 Charging the battery
F
To charge the battery, the truck must be parked in a closed and properly ventilated
room.
Expose the battery (see Section 3).
M
The battery connector (4) and the charging cable (6) of the battery charging station
must only be connected or disconnected when the truck and the battery charger are
switched off. The isolator (5) must also only be applied when the truck and the battery
charger are switched off.
F
When charging, the tops of the battery cells must be exposed to provide sufficient
ventilation. Do not place any metal objects on the battery. Before charging, check all
cables and plug connections for visible signs of damage.
All safety instructions given by the battery and battery charger manufacturers must
be strictly observed.
Pull out the battery plug (4) from the holder.
Remove any insulating mats from the battery.
Connect the charging cable (6) of the battery charging station to the battery
connector (4) and switch on the charger.
M
Recharge the battery observing the instructions provided by the battery supplier and
by the battery charger supplier.
6
4
5
D 3
1206.GB
4 Charging the battery
F
To charge the battery, the truck must be parked in a closed and properly ventilated
room.
Expose the battery (see Section 3).
M
The battery connector (4) and the charging cable (6) of the battery charging station
must only be connected or disconnected when the truck and the battery charger are
switched off. The isolator (5) must also only be applied when the truck and the battery
charger are switched off.
F
When charging, the tops of the battery cells must be exposed to provide sufficient
ventilation. Do not place any metal objects on the battery. Before charging, check all
cables and plug connections for visible signs of damage.
All safety instructions given by the battery and battery charger manufacturers must
be strictly observed.
Pull out the battery plug (4) from the holder.
Remove any insulating mats from the battery.
Connect the charging cable (6) of the battery charging station to the battery
connector (4) and switch on the charger.
M
Recharge the battery observing the instructions provided by the battery supplier and
by the battery charger supplier.
6
4
5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Jungheinrich ECE 220 and is the answer not in the manual?

Jungheinrich ECE 220 Specifications

General IconGeneral
BrandJungheinrich
ModelECE 220
CategoryForklifts
LanguageEnglish

Related product manuals