To Next Page

To Previous Page

1007.GB

E 16

4.6 Seat o (XL only)

The seat (16) is incorporated into the backrest

when folded up. When unfolded, the seat allows the

operator to take up a comfortable position for

driving and operating. The height of the seat is

adjustable and can be locked into one of four

positions.

– Unfold the seat (16), pull it towards you and push

it into the desired height. Lock the seat at the

desired height.

– To set a higher position, push the seat up and

release it in the desired position.

– To fold it in, push the seat into the highest

position and fold it back.

4.7 Parking the truck securely

When you leave the truck it must be securely parked even if you only intend to leave

it for a short time.

Do not park the truck on a slope. The lift mechanism must always be completely

lowered.

– Lower the lift mechanism.

– Set the drive wheel to “Straight ahead”.

Jet-Pilot (t): the steering arm is set automatically to forward travel.

Tiller steering (o): set tiller to the forward position.

– Turn the key switch (14) “OFF” (“0”) and remove the key.

– For CANCODE, press the o key.

– Set the isolator (emergency stop) (1) “OFF”.