Jungheinrich ECE 220 - 5 Keypad (CANCODE) (○)

E 17
1007.GB
5 Keypad (CANCODE) (o)
The keypad consists of 10 digit keys, a Set key
and a o key.
Activation of the travel programs is indicated
through green LEDs on keys 1, 2 and 3.
The o key indicates operational status through a
red/green LED.
It contains the following functions:
– Code lock function (commissioning the truck).
– Travel program selection.
– Setting the travel and battery parameters, only
in conjunction with the display instrument
(CANDIS (o)).
The o key has top priority and restores the truck
from any status to its default status without
modifying any settings.
5.1 Code Lock
When the correct code has been entered, the machine is ready for use. You can
allocate an individual code to each truck, driver or group of drivers.
Z
When supplied from the factory, the operator code (factory setting 2-5-8-0) is
indicated on a removable sticker.
M
When starting the truck for the first time, change the master and operating codes.
(see section 5.4)
1 2 3
4 5 6
7 8 9
0
Set
E 17
1007.GB
5 Keypad (CANCODE) (o)
The keypad consists of 10 digit keys, a Set key
and a o key.
Activation of the travel programs is indicated
through green LEDs on keys 1, 2 and 3.
The o key indicates operational status through a
red/green LED.
It contains the following functions:
– Code lock function (commissioning the truck).
– Travel program selection.
– Setting the travel and battery parameters, only
in conjunction with the display instrument
(CANDIS (o)).
The o key has top priority and restores the truck
from any status to its default status without
modifying any settings.
5.1 Code Lock
When the correct code has been entered, the machine is ready for use. You can
allocate an individual code to each truck, driver or group of drivers.
Z
When supplied from the factory, the operator code (factory setting 2-5-8-0) is
indicated on a removable sticker.
M
When starting the truck for the first time, change the master and operating codes.
(see section 5.4)
1 2 3
4 5 6
7 8 9
0
Set