Jungheinrich ECE 220 User Manual

E 29
1007.GB
Program-independent parameters
Z
For trucks without a display instrument (CANDIS (o)) theBATTERY parameters can
only be set by the manufacturer's service department.
The parameters are set in the same way as for the travel parameters.
The following parameters may be entered.
Setting 0 / 1 is to be interpreted as: 0 = off 1 = on
6ISM (o)
Z
If the truck is equipped with an ISM access module see “ISM Access Module”.
No. Function Setting
range
Standard
setting
Comments
Battery parameters
411 Battery type (normal /
high performance / dry)
0 - 2 0 0 = Normal (wet)
1 = high performance
(wet)
2 = Dry
(maintenance-free)
412 Discharge monitor
function
0 / 1 1
E 29
1007.GB
Program-independent parameters
Z
For trucks without a display instrument (CANDIS (o)) theBATTERY parameters can
only be set by the manufacturer's service department.
The parameters are set in the same way as for the travel parameters.
The following parameters may be entered.
Setting 0 / 1 is to be interpreted as: 0 = off 1 = on
6ISM (o)
Z
If the truck is equipped with an ISM access module see “ISM Access Module”.
No. Function Setting
range
Standard
setting
Comments
Battery parameters
411 Battery type (normal /
high performance / dry)
0 - 2 0 0 = Normal (wet)
1 = high performance
(wet)
2 = Dry
(maintenance-free)
412 Discharge monitor
function
0 / 1 1

Jungheinrich ECE 220 Specifications

General

Brand	Jungheinrich
Model	ECE 220
Category	Forklifts
Language	English