Jungheinrich ERE Series User Manual

1113.GB
E 6
3 Starting up the truck
F
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks and operations to be performed before starting daily work
– Visually inspect the entire truck (in particular wheels and load handler) for obvious
damage.
– Visually inspect the battery attachment and cable connections.
Switching on the truck
– Make sure the battery is connected (13).
– Insert the key in the key switch (11) and turn it to the right as far as it will go (position
“I”) or for CanCode (12) (o) enter the release code.
(see Section 5).
– Test the warning button (6).
The truck is now operational.
o The battery discharge indicator (9) or the CanDis display instrument (10) indicates the
existing battery charge status.
– Test the braking operation of the tiller (5) (see section 4.2).
6
13
11, 12
9, 10
5
1113.GB
E 6
3 Starting up the truck
F
Before the truck can be commissioned, operated or a load unit lifted, the driver must
ensure that there is nobody within the hazardous area.
Checks and operations to be performed before starting daily work
– Visually inspect the entire truck (in particular wheels and load handler) for obvious
damage.
– Visually inspect the battery attachment and cable connections.
Switching on the truck
– Make sure the battery is connected (13).
– Insert the key in the key switch (11) and turn it to the right as far as it will go (position
“I”) or for CanCode (12) (o) enter the release code.
(see Section 5).
– Test the warning button (6).
The truck is now operational.
o The battery discharge indicator (9) or the CanDis display instrument (10) indicates the
existing battery charge status.
– Test the braking operation of the tiller (5) (see section 4.2).
6
13
11, 12
9, 10
5

Jungheinrich ERE Series Specifications

General

Brand	Jungheinrich
Model	ERE Series
Category	Compact Loader
Language	English