To Next Page

To Previous Page

E 15

1113.GB

5.2 Travel programs

Press the digit keys 1, 2, and 3 to select any of three travel programs. The activated

programme is indicated by the green LEDs (18), (19), (20) in the corresponding key.

The travel programs differ with respect to travel speed, acceleration and deceleration

force.

Factory settings:

– Program 1: Soft operation

– Program 2: Normal mode (pre-selected when using the truck for the first time)

– Program 3: Power mode

The travel programs can be individually adapted (see Section 5.5).

5.3 Parameters

In programming mode, the operator keypad enables you to set the code lock

functions and adapt travel programs. In addition, the battery parameters can also be

set.

For trucks without a display instrument (CanDis (o)) the parameters must be

adjusted with particular care to avoid incorrect entries.

The internal parameter numbers for the code lock are comprised of three digits.

All other parameter numbers are comprised of four digits.