Jungheinrich ERE Series User Manual

0709.GB
F 4
4 Maintenance Checklist
Maintenance intervals
Standard = t WA B C
Cold Store = k
Brake 1.1 Check magnetic brake air gap. t
Electrics 2.1 Test instruments, displays and control switches. t
2.2 Test warning and safety device. kt
2.3 Check fuse ratings. t
2.4 Make sure wire connections are secure and check for
damage.
t
2.5 Test micro switch setting. t
2.6 Check contactors and relays. t
2.7 Frame leakage test t
2.8 Test cable and motor attachments. t
2.9 Check carbon brush wear, replace if necessary. t
Power
supply
3.1 Visually inspect battery kt
3.2 Check battery cable connections are secure, grease
terminals if necessary.
kt
3.3 Check acid density, acid level and battery voltage. kt
Travel 4.1 Check motor suspension. t
4.2 Check the transmission for noise and leakage. t
4.3 Replace gear oil if service life exceeded (10,000 hours).
4.4 Check travel mechanism, adjust and lubricate if
necessary.
Check tiller recuperating function.
kt
4.5 Check wheels for wear and damage. kt
4.6 Check wheel bearings and attachments. t
Truck
design
5.1 Test the operator’s platform and check for damage. t
5.2 Check chassis for damage and screw connections. t
5.3 Check labels. t
0709.GB
F 4
4 Maintenance Checklist
Maintenance intervals
Standard = t WA B C
Cold Store = k
Brake 1.1 Check magnetic brake air gap. t
Electrics 2.1 Test instruments, displays and control switches. t
2.2 Test warning and safety device. kt
2.3 Check fuse ratings. t
2.4 Make sure wire connections are secure and check for
damage.
t
2.5 Test micro switch setting. t
2.6 Check contactors and relays. t
2.7 Frame leakage test t
2.8 Test cable and motor attachments. t
2.9 Check carbon brush wear, replace if necessary. t
Power
supply
3.1 Visually inspect battery kt
3.2 Check battery cable connections are secure, grease
terminals if necessary.
kt
3.3 Check acid density, acid level and battery voltage. kt
Travel 4.1 Check motor suspension. t
4.2 Check the transmission for noise and leakage. t
4.3 Replace gear oil if service life exceeded (10,000 hours).
4.4 Check travel mechanism, adjust and lubricate if
necessary.
Check tiller recuperating function.
kt
4.5 Check wheels for wear and damage. kt
4.6 Check wheel bearings and attachments. t
Truck
design
5.1 Test the operator’s platform and check for damage. t
5.2 Check chassis for damage and screw connections. t
5.3 Check labels. t

Jungheinrich ERE Series Specifications

General

Brand	Jungheinrich
Model	ERE Series
Category	Compact Loader
Language	English