To Next Page

To Previous Page

03.13 EN

Cleaning the battery with a high pressure cleaner

Requirements

– Cell connectors tight, plugged in securely

– Cell plugs closed

Procedure

• Follow the high pressure cleaner's user instructions.

• Do not use any cleaning additives.

• Observe the permissible cleaning device temperature setting of 140°C.

Z This generally ensures that the temperature does not exceed 60°C at a distance of

30cm behind the outlet nozzle.

• Observe the maximum operating pressure of 50 bar.

• Observe a minimum distance of 30 cm from the top of the battery.

• The battery should be sprayed over its entire surface to avoid localised

overheating.

Z Do not clean one spot for more than 3 seconds with the jet to avoid exceeding the

maximum battery surface temperature of 60°C.

• After cleaning dry the battery surface with suitable materials e.g. compressed air or

cleaning cloths.

Battery cleaned.