JVC CA-MXG9BK User Manual

RX-MXG9BK
1-14 (No.20434)
FREQUENCY
Creating Your own SEA Patterns
=
Press the PRESET button to select the manual mode.
The LED next to it lights up.
ad
Press the FREQUENCY button to set the frequency range to be changed.
The frequency range level bar on the display will blink.
Each time you press the FREQUENCY button, the frequency range
changes up or down. While it is blinking you can set the frequency
level.
Nad
Press the ~- LEVEL + button to set the level, while the selected frequency
range level bar is blinking.
>
Repeat steps 2 and 3 to adjust other frequency ranges.
You can adjust 7 frequency ranges.
Note
Although the five SEA preset patterns cannot be changed, an individual sound pattern can
be created based ona preset pattern. When you make any change to the SEA preset pattern,
the Unit automatically enters the manual mode so you can modify and store the pattern you
create.
To store the pattern
1. Press the MEMORY button after creating your own SEA pattern.
Whole ranges on the display will blink.
2. While the ranges are blinking, press the PRESET button to select the memory
MANUAL A, B, C, D, or E.
3. Press the MEMORY button again to store the pattern in memory.
When the pattern appears on the display, it is now stored.
Recording the SEA Sound Pattern
To record sound together with a SEA sound pattern (either a preset or manual
one), first turn on SEA and select the desired sound pattern. The music will be
enhanced according to the pattern you selected. SEA sound patterns cannot be
applied to the following types of recording:
* A song cannot be dubbed (at either normal or high speeds)with a SEA sound
pattern.
« When the amplifier's SOURCE DIRECT is ON, songs cannot be recorded with
a SEA sound pattern.
Page 12

JVC CA-MXG9BK Specifications

General

Brand	JVC
Model	CA-MXG9BK
Category	Stereo System
Language	English