JVC CA-MXG9BK User Manual

RX-MXG9BK
Using Programmed Play
In addition to the high quality sound which makes the CD such a good way to
listen to music, you can change the order in which the tracks play. You can
arrange the tracks to play in any order you like with the Program function. The
Remote is very useful for this because you can select tracks by number with the
10 keys.
To program the CD track order from the Remote
TUNER CD DSP
‘
—
. Set the TUNER /CD /DSP selector to the CD position.
nN
. Press the PRGM button. PROGRAM lights on the CD display window
3. Press the 10 keys to select the track numbers you want.
Your program can include up to 32 tracks, and you can repeat tracks
if you wish.
4. Press the > button on the CD CONTROL section of the Remote to start
the program.
The first track you programmed will start to play.
To stop the CD during Programmed Play
Press the C1 button. To cancel the program, press the PRGM or the
PROGRAM button on the main Unit.
*
A Few Hints to Make Programming Easier
If you want to change the number of a track you just entered,
press CANCEL on the main Unit, and enter another number.
If you want to change the entire program, press the STOP/
CLEAR @ button on the main Unit twice, and then you can
start over.
To view the order of the tracks in your program when it’s
playing, press the D button, then press the <4 or 1 on the
CD CONTROL section of the Remote to display the order
of the tracks. Each time you press the 1 button the next
selection in your program is displayed. (Press the
button for the previous selections.)
Toadda track to your program during play, press the 10 keys
on the Remote. Any tracks you add will appear at the end of
the current program.
Page 30
1-32 (No.20434)

JVC CA-MXG9BK Specifications

General

Brand	JVC
Model	CA-MXG9BK
Category	Stereo System
Language	English