JVC CA-MXG9BK User Manual

RX-MXG9BK
Connecting the System Control Cords and Connecting Auxiliary Equipment
Connect the components
exactly as illustrated.
When you don't use VS-G3BK Graphic
decoder (optional), connect the CON-
NECTOR-C of the CD Player to the
CONNECTOR-C of the Tuner/Amplifier.
Video
Disc
Player
Audio
out
Video out
Video out is only for NTSC output. When
you use the Unit in an area where
NTSC is not the system used for TV
color transmission, connect the Video
out to a multi-system TV.
VCR , DCC or MD
any
other
equipment
Audio
out
Video out
Peer errr
eax wewemn?
oO ©
Bh
Deere rrr rr
* DCC; Digital Compact Cassette Deck
* MD : Mini-disc Player
Graphic Equalizer
Use MM-cartridge type Player
only.*
Tuner/Amplifier’
* If the Player is supplied with a ground
wire, connect itto the GND 7} terminal
where the AM Loop Antenna is con-
nected.
CD Player
‘CONNEGTOR-F
Prom comaccone
DAT or DCC
1. Press the middle of the con-
nector unit until it clicks into
the male connector.
2. Pull the connector out. Never
pull on the cords themselves.
Cassette Deck
VS-G3BK Graphic decoder (optional)
* This decorder is designed to work
with the NTSC colour system only.
Use a multi-system TV can repro- * Match the polarity of the 5 terminals. A-A, B-B, C-C,
duce the NTSC system. RIGHT-RIGHT, LEFT-LEFT. RIGHT and LEFT are
for speakers.
recorded.
Set
the
BEAT
CUT
selector
to
either
1
or
2,
so
that
beat
sounds
will
not
be
heard
nor
recorded.
BEAT
CUT
When
recording
an
AM
(MW/LW)
broadcasting
program,
beat
sounds
may
be
heard
and
|
1
2
|
CAUTION:
First
make
all
connections
before
plugging
the
Unit
into
an
AC
power
outlet.
Page
4
1-6 (No.20434)

JVC CA-MXG9BK Specifications

General

Brand	JVC
Model	CA-MXG9BK
Category	Stereo System
Language	English