JVC CA-MXG9BK User Manual

1
WAKE UP
#SLEEP
2
foes > 0:30 -~ 0:45 od)
cancelled+-12:00+«- 4:00 3:00~+ 2:00+- 1:30
SNPs
etoo 6 6aog
current time f
Tad
setting time
2
* 0:05 —-*0:10 ——~-0:15 —»0:30 —» 1:00
-1:45~-— 1:30~ 1:15~
current time setting time
Page 35
RX-MXG9BK
WAKE UP Timer
With this timer you can wake up to music from a CD, tape or your favorite radio
program.
* The WAKE UP Timer can only be set when the Unit is turned off.
1. Press the WAKE UP/SLEEP button with the CA-MXG9BK off.
The WAKE UP indicator on the display will start blinking.
2. Set the time you want the Unit to turn on.
* — Each time you press the WAKE UP/SLEEP button, it changes the
time shown on the display in the sequence shown at left and is added
to the current time.
After selecting the time,wait about 5 seconds, and the CA-MXG9BK memorizes
your setting.
« The WAKE UP timer indicator remains lit on the display to let you
know that the WAKE UP timer is set.
To cancel the WAKE UP timer setting
Press the POWER button, and the WAKE UP timer indicator on the
display will turn off.
To check the time remaining until the Unit turns on
Press the WAKE UP/SLEEP button once.
The remaining time will be displayed for 5 seconds.
To change the set time
Press the WAKE UP/SLEEP button repeatedly.
Hints for using your WAKE UP Timer
« When the set time comes you will hear the most recently used
source.
* The volume when the timer turns on the source is the volume last
set when the CA-MXG9BK was used. This can be quite a surprise
first thing in the morning, so you might want to reset it before
going to sleep.
+ Ifthe CD is the most recently used source, it starts playing from
the first track.
SLEEP Timer
Using this timer, you can fall asleep to music and know your CA-MXG9BK will
turn off by itself rather than play all night.
« SLEEP timer can be set only when the Unit is turned on.
1. With the CA-MXG9BK on and a source playing, press the WAKE UP/
SLEEP button.
The SLEEP indicator on the display will start blinking.
2. Set the length of time you want the source to play before shutting off.
Each time you press the WAKE UP/SLEEP button while SLEEP is
blinking, the time shown on the display changes as shown at left and
is added to the current time.
The Unit will now turn off after the time you set.
To cancel the Sleep Timer setting
Simply turn the Unit off. SLEEP indication disappears from the
display.
(No.20434) 1-37

JVC CA-MXG9BK Specifications

General

Brand	JVC
Model	CA-MXG9BK
Category	Stereo System
Language	English