JVC CA-MXG9BK User Manual

RX-MXG9BK
Special Sound Adjustment
Mood Menu
The
Mood
Menu
allows
you
to
select
one
of
four
special
effect
sound
modes.
Selecting
a
mode
will
set
the
respective
SEA
pattern,
DSP
programs,
and
panoramic
shifting
speaker
angle
automatically.
The
individual
mode
allows
you
to
store
your
own
settings
in
memory.
EXCITING (1+3)
Press the EXCITING button.
EXCITING
=
1*3)
Regardless
of
the
music
source,
a
sharp,
upbeat
sound
is
produced.
Each time you press the button, the depth of the effect changes among
RELAXING (1~3)
: Press the RELAXING button.
A beautiful, subtle sound is obtained. The sound feels like a refresh-
ie ™ EXCITING2 — Maar | ing breeze which gives a relaxed feeling.
+ _ Eachtime you press the button, the depth of the effect changes among
3 grades.
RELAXING
(1+3)
SOOTHING
(1~3)
Press the SOOTHING button.
By controlling the dynamic range, a rich, easy listening sound can be
maintained. Low-volume sounds drowned out by larger-volume
sounds are boosted and peak sounds are suppressed.
Each time you press the button, the depth of the effect changes among
cage —> RELAXING2 a 3 grades.
INDIVIDUAL
Press the INDIVIDUAL button so that the stored setting is called up.
SOOTHING (1~3)
: You can use the individual mode to create your own customized
Wra! sound effect by combinating one of the DSP programs (Dolby Pro
=F Logic , DAP, and DSEP) and one ‘of the SEA patterns. The individual
mode settings can be stored in memory.
Notes
* Donotkeep the INDIVIDUAL buttonpressed to call up the stored setting ; otherwise, you
may store a new setting rather than calling up the previous one (see below).
* When you store only the SEA MANUAL pattern, the display shows only the MANUAL
indicator.
INDIVIDUAL + When youpress the SOOTHING button, the LED on the PANORAMIC SURROUND
button goes off.
To store your own customized DSP mode into the INDIVIDUAL mode
OOTHING1 > fee ee eee |
{NOI-
aie 1. Select the desired DSP mode. (See page 13-16)
2. Adjust the frequency range.(See page 12)
3. Press and hold the INDIVIDUAL button to store your own pattern.
Using 4CH/SEP. C (4 Channel Separate Center)
With the 4CH/SEP. C button, you can control the following settings.
+ Setting the 4CH (front and rear speakers) or 2CH (front speakers only) in the
DAP mode.
+ Setting the separate center in the Dolby Pro Logic mode.
« Recording the source with a DAP or DSEP effect.
Press the 4CH/SEP. C button.
The LED next to it lights up.
1) You can use the 4 channel (front and rear speakers) effect by
connecting optional rear speakers.
2) By connecting the optional center speaker, you can use it sepa-
rate mode in the Dolby Pro Logic mode.
3) You can record any source with either the DAP or DSEP effect.
But remember, you can not use both effects at the same time.
To cancel the 4CH/SEP. C mode, press the 4CH/SEP. C button again.
The LED goes off.
Page 17
l
(No.20434)
1-19

JVC CA-MXG9BK Specifications

General

Brand	JVC
Model	CA-MXG9BK
Category	Stereo System
Language	English