JVC CA-NXBD3 User Manual

63
Operating other devices using the remote control
You can operate your TV, video cassette recorder
(VCR) and set-top box (STB) using the remote
control of this system.
* For the number button usage, refer to “Using the
number buttons” on page 12.
1 Slide the remote control
mode selector to [TV].
2 Hold down [TV A].
• Hold down [TV A] until you
finish step 4.
3 Press [ENTER] and release.
4 Press [the number buttons] to enter
the manufacturer code.
Examples:
For a Hitachi TV: Press [0], then [7].
For a Toshiba TV: Press [2], then [9].
When the manufacturer of your TV has 2 or more
codes, select the manufacturer codes in turn and find
the one that operates the TV and the remote control
properly.
5 Release [TV A].
NOTE
•Manufacturer codes are subject to change without
notice. You may not be able to operate the TV
produced by the manufacturer.
• After replacing the batteries of the remote control,
set the manufacturer code again.
the number
buttons*
CH +/-
TV A
ENTER
TV/VIDEO
N
STB/VCR A
VCR
STB
TV VOL +/-
;
O
o
W
100+
TV RETUEN
REC w
Remote
control
mode
selector
Operating a TV using the
remote control
Setting the manufacturer code
Manufacturer Code Manufacturer Code
JVC 01 Nordmende 13, 14, 18,
26, 27, 28
Akai 02, 05 Okano 09
Blaupunkt 03 Orion 15
Daewoo 10, 31, 32 Panasonic 16, 17
Fenner 04, 31, 32 Philips 10
Fisher 05 Saba 13, 14, 18,
26, 27, 28
Grundig 06 Samsung 10, 19, 32,
35, 36, 37,
38
Hitachi 07, 08 Sanyo 05
Inno-Hit 09SEG 15
Irradio 02, 05 Schneider 02, 05
Loewe 10 Sharp 20, 39, 40
Magnavox 10 Sony 21, 22, 23,
24, 25
Mitsubishi 11, 33 Telefunken 13, 14, 18,
26, 27, 28
Miver 03 Thomson 13, 14, 18,
26, 27, 28,
30
Nokia 12, 34 Toshiba 29

JVC CA-NXBD3 Specifications

General

Brand	JVC
Model	CA-NXBD3
Category	Blu-ray Player
Language	English