JVC CA-NXBD3 User Manual

19
* For the number button usage, refer to “Using the
number buttons” on page 12.
CAUTION
1 Press [FM/AM] to select “FM” or
“AM” in the display window.
•Each time you press [FM/AM], the band
toggles between “FM” and “AM”.
• Repeatedly pressing [SOURCE] on the main
unit can also select a radio broadcast as the
source.
2 Press [TUNING =] or [TUNING +]
repeatedly to select a radio station.
• When the main unit has receive an FM stereo
broadcast, the “ST” (stereo) indicator lights up
in the display window.
•You can also select a radio station using the
automatic tuning.
 Automatic tuning
Hold down [TUNING =] or [TUNING +] until the
frequency starts changing, and then release the
button.
• When the main unit has received a broadcast, the
fre
quency automatically stops changing.
•You can select a specific radio station while
searching for a broadcast. Press [TUNING =] or
[TUNING +] to stop the automatic tuning when the
desired frequency appears in the display window.
NOTE
•If an FM stereo broadcast is difficult to hear
because of noise, you may be able to hear the
broadcast more easily by pressing [FM MODE] to
switch the sound to monaural reception. In this
case, the “MONO” (monaural) indicator lights up in
the display window. To return the sound to stereo
reception, press [FM MODE] again.
Listening to radio broadcasts
Slide the remote control mode selector
to [AUDIO].
FM/AM
Remote
control
mode
selector
J / K
PRESET =,H
PRESET +,I
ENTER
FM MODE
TUNING +
TA / News /
Info
PTY SELECT
+
RDS DISPLAY
PTY SELECT
=
PTY SEARCH
TUNING =
CANCEL
the number
buttons*
Selecting a radio station
Example: Display when an FM radio broadcast is
received
Stereo indicator Frequency
Preset number (Refer to page 20)

JVC CA-NXBD3 Specifications

General

Brand	JVC
Model	CA-NXBD3
Category	Blu-ray Player
Language	English