JVC CA-NXBD3 User Manual

4
(Continued on the next page.)
Using this Product (Connecting)
Connect the speakers to the subwoofer by connecting the colored connectors to the same color terminals on
the rear of the subwoofer.
o IMPORTANT
• Improper speaker cable connection reduces the
stereo effect and sound quality.
•The supplied left/right speakers are magnetically
shielded, but color irregularity may occur on the TV
depending on some conditions. To prevent color
irregularity, set up the speakers following the
instructions below.
(The subwoofer is not magnetically shielded.)
1. Turn off the main power of the TV before
setting up the speakers.
2. Place the speakers enough distance from the
TV so that they do not cause color irregularity
on the TV.
3. Wait for approximately 30 minutes before
turning on the main power of the TV again.
CAUTION
•The supplied speakers are manufactured
exclusively for use with the supplied main unit as
parts of the NX-BD3 system. Do not connect the
supplied speakers to devices other than the
supplied main unit. Doing so may damage the
speakers.
• Do not connect external speakers together with the
supplied speakers. The change in impedance may
damage the main unit and the speakers.
Connecting the speakers and subwoofer
CAUTION:SPEAKER IMPEDANCE 3 - 16
RIGHT
SPEAKERS
LEFT
FRONT FRONTSURROUND SURROUND
CONNECTOR
FROM
CA-NXBD3
RIGHT
SPEAKERS
LEFT
FRONT FRONTSURROUND SURROUND
CONNECTOR
FROM
CA-NXBD3
Left speaker
(rear view)
Right speaker
(rear view)
Speaker cable
Speaker cable
Main unit (rear)
System cable
(supplied)
Red
Gray
Blue
White
subwoofer (rear)

JVC CA-NXBD3 Specifications

General

Brand	JVC
Model	CA-NXBD3
Category	Blu-ray Player
Language	English