EasyManuals Logo
Home>KEB>DC Drives>COMBIVERT F0

KEB COMBIVERT F0 User Manual

KEB COMBIVERT F0
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
70
Applikation / Auswahl
In der Software-Version 1.2 sind mehrere applikations-
spezifische Softwaremodule integriert. Wird die Appli-
kation gewechselt, muß ein Power-on-Reset (Frequenz-
umrichter AUS, d.h. Display ist dunkel) gemacht wer-
den. Der Frequenzumrichter wird dabei neu initialisiert.
Application selection
Several application-specific software modules are
integrated in the software version 1.2. When changing
the application a power-on-reset (frequency inverter
OFF, i.e. display is dark) must be made, to initialize the
frequency inverter again.
Steuerwort / Aktivierung
Dieser Parameter schaltet den Frequenzumrichter in
den DRIVECOM-Modus. Im DRIVECOM-Modus rea-
giert der Frequenzumrichter auf ein Steuerwort (Pr.6),
das über die Bus-Profil-Parameter vorgegeben wird (s.
Anhang A.12). Aus Sicherheitsgründen muß die Regler-
freigabe zusätzlich hardwaremäßig gebrückt werden.
Control word activation
This parameter puts the frequency inverter into the
DRIVECOM-Mode. In the DRIVECOM-Mode the
frequency inverter reacts on a control word (Pr.6), which
is preset with the Bus Profile Parameters (see Annex
A.12). For reasons of safety the control release requires
an additional hardware bridging.
FUNCT
Steuerwort aus / Control word off
Steuerwort ein / Control word on
Die 1-kHz-Version funktioniert wie die Standardsoft-
ware. Durch die geringere Schaltfrequenz verursacht
der Umrichter jedoch weniger Störungen im Netz. Die
Abtastzeiten der analogen und digitalen Eingänge sind
verlängert.
The 1-kHz version functions like the standard software.
The lower carrier frequency also reduces the mains
interferences from the inverter. The sampling times of
the analog and digital inputs are extended.
FUNCT
Standard-Software
reserviert, nicht einstellen / reserved, don't
use
1-kHz-Version
C.25 = on => Statusmeldung nOP.; LS., wenn über Pr.6
Reglerfreigabe bzw. Drehrichtung deaktiviert ist.
C.25 = on => Status indication nOP.; LS., if control
release or rotation direction are deactivated with Pr.6.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KEB COMBIVERT F0 and is the answer not in the manual?

KEB COMBIVERT F0 Specifications

General IconGeneral
BrandKEB
ModelCOMBIVERT F0
CategoryDC Drives
LanguageEnglish

Related product manuals