SAFETY PRECAUTIONS 1-9
069O118A
069O119A
069O120A
PARKING THE TRACTOR
1. Disengage the PTO, lower all
implements, place all control levers in
their neutral position, set the parking
brake, stop the engine, and remove
the key.
2. Make sure that the tractor has come
to a complete stop before dismounting.
8. Make sure that the Slow Moving Ve-
hicle (SMV) sign is clean and visible.
Use hazard lights as required.
(1) PTO Shaft cover (2) PTO Shaft cap
OPERATING THE PTO
1. Wait until all moving components have
completely stopped before getting off
the tractor, connecting, disconnecting,
adjusting, cleaning, or servicing any
PTO driven equipment
2. Keep the PTO shaft cover in place at
all times. Replace the PTO shaft cap
when the shaft is not in use.
3. Before installing or using PTO driven
equipment, read the maunfacturer’s
manual and review the safety labels
attached to the equipment.
(1) S.M.V. Emblem (2) Bracket
To Next Page
Loading...
Need help?
General
