4-12 DK55
069O422A 069O423A
The main shift lever pattern is in the form
of an “H”. The range lever is used to se-
lect three stage, “High”, “Middle” and
“Low”. By combination and use of the
main shift lever and the range lever, it is
possible to obtain four speeds forward
and reverse in “High” range, four speeds
forward and reverse in “Middle” range
and four speeds forward and reverse in
“Low” range, or a total of twelve speeds
forward; and twelve speeds reverse,
High, Middle and Low.
MAIN SHIFT LEVER &HI-LO SHIFT LEVER
(1) Hi-Lo Shift Lever (2) Main Shift Lever
The tractor’s driven forward or in
reverse, without the steps of main or
secondary shift by pushing it forward or
pulling it backward.
SHUTTLE SHIFT LEVER
(A) Forward (B) reverse
CAUTION
The shuttle shift lever maybe be
shifted while the tractor is mov-
ing slowly and the clutch is
depressed.
Sudden gear shift may cause
transmission damage.
CAUTION
To change speed, press the clut-
ch pedal completely down before
attempting to proceed with speed
change.
To Next Page
Loading...
Need help?
General
