10-6 DK55
1. Check front grill and side screens to
be sure they are clean of debris.
2. Detach the screen and remove all the
foreign material.
1. Inspect the instrument panel for bro-
ken gauge(s), meter(s) and Easy
Checker lamps.
2. Replace if broken.
CHECKING HEAD LIGHT,
HAZARD LIGHT ETC.
1. Inspect the lights for broken bulbs and
lenses.
2. Replace if broken.
CHECKING SEAT BELT AND ROPS
1. Always check condition of seat belt
and ROPS attaching hardware before
operating tractor.
2. Replace if damaged.
1. The brake and clutch pedals should be
inspected for free travel, and smooth
operation.
2. You should adjust these pedals if an
incorrect measurement is found.
(See “adjusting clutch and brake ped-
als” in the 100 hour maintenance
schedule.)
CHECKING BRAKE AND CLUTCH
PEDALS
CHECKING GAUGES, METER AND
EASY CHECKER
CAUTION
To avoid personal injury:
Be sure to stop the engine be-
fore removing the screen.
IMPORTANT
Grill and screen must be clean
from debris to prevent engine
from overheating and to allow
good air intake for the air cleaner.
NOTE
Brake pedals should be equal when
depressed.
To Next Page
Loading...
Need help?
General
