Komatsu Avance Loader WA900-3 User Manual

2-74
12. OPERATION
12.19 REMOVAL AND INSTALLATION OF THE
BUCKET
 WARNING
Park the machine on level ground, set safety bar 3 on the frame,
ground the bucket, shut down the engine, apply the parking
brake 2 and place blocks 1 under the tires.
Remove or install the bucket in the following manner, if so
required for the convenience of transportation.
3. Remove mounting bolt 6.
REMOVING THE BUCKET
1. Remove mounting bolt 4.
2. Sling the bucket link, then pull out bucket link pin 5.
Secure the bucket link to the tilt lever with wires.

Komatsu Avance Loader WA900-3 Specifications

General

Brand	Komatsu
Model	Avance Loader WA900-3
Category	Construction Equipment
Language	English