5-110
42. EMERGENCY ENGINE STOP SWITCH
An emergency engine stop switch is provided in the operator’s cab and two other spots on the
machine’s periphery (3 spots total). If any one of them is pressed, the engine stops. Use this switch only
in emergency, and for normal starting and stopping of the engine, use the engine starting switch.
The mounting position of the switches marked with * differs
according to the specification.
1. Press the nearest emergency engine stop switch, and the engine
stops.
2. If the engine remains in a standstill for a while, turn off the
engine starting switch in the operator’s cab.
(If any of the lights is kept on, the battery can run down.)
3. Remove the cause that necessitated the engine to stop all of
sudden.
4. Reset the emergency engine stop switch by turning the button
in the arrow direction (clockwise) until it comes out.
Now the switch is in the emergency stop position again.
5. When starting up the engine again, use the engine starting
switch.
REMARK
If the engine does not stop even when the emergency engine
stop switch is operated, stop the engine with the stop switch at the
bottom left of the operator's seat.
(For details, see ”11.2 SWITCHES“)
To Next Page
Loading...
Need help?
General
