Komatsu Avance Loader WA900-3 User Manual

2-49
12. OPERATION
12.2 STARTING ENGINE
12.2.1 NORMAL STARTING
 WARNING
‡ Start the engine only after sitting down in the operator’s seat.
‡ Do not attempt to start the engine by short-circuiting the engine
starting circuit. Such an act may cause serious bodily injury or fire.
‡ Check that there are no persons or obstacles in the surround-
ing area, then sound the horn and start the engine.
‡ Exhaust gas is toxic. When starting the engine in confined
spaces, be particularly careful to ensure good ventilation.
NOTICE
Do not keep the starting motor rotating continuously for more
than 20 seconds.
If the engine will not start, wait for at least 2 minutes before
trying to start the engine again.
1. Turn the key in starting switch 1 to the ON position.
2. Depress accelerator pedal 2 lightly.
3. Turn the key of starting switch 1 to the START position to start
the engine.
4. When engine is started, release the key of starting switch 1 and
the key will return automatically to ON.

Komatsu Avance Loader WA900-3 Specifications

General

Brand	Komatsu
Model	Avance Loader WA900-3
Category	Construction Equipment
Language	English