5-50
35. HANDLING AJSS (ADVANCED JOYSTICK STEERING SYSTEM)
CONTROL FOR SHIFTING GEAR DOWN AT HIGH TRAVEL SPEED
If it is attempted to switch between FORWARD and REVERSE
when the machine is traveling at high speed, if the travel speed and
engine speed are in area I in the chart on the right, the alarm buzzer
will sound for 3 seconds (rapid intermittent sound).
If the alarm buzzer sounds, depress the brake immediately to
reduce the travel speed sufficiently, then change direction between
FORWARD and REVERSE.
If it is attempted to change direction between FORWARD and
REVERSE in area of II in the chart on the right, the alarm buzzer will
sound, and at the same time, the transmission will shift to a speed
range that matches the travel speed and the travel speed will be
reduced, so the deceleration will be weaker than when in area I.
35.3 OPERATION METHOD OF JOYSTICK
STEERING SYSTEM
¤ WARNING
‡ When leaving the operator's compartment, set the safety lock
lever securely to the LOCK position, regardless of whether
the engine is running or not.
Particularly when the engine is running, if the steering lever
is not locked, and they are touched by mistake, this may lead
to a serious accident.
‡ If the safety lock lever is not placed securely in the LOCK
position, the control levers may not be properly locked.
‡ When parking the machine or carrying out maintenance,
always set to the LOCK position.
‡ When the transmission is at autoshift, shift indicator lamp q
lights up and the presently selected maximum speed range is
displayed. (It does not light up when manual shift is selected.)
To Next Page
Loading...
Need help?
General
