.
OPERATION
TRANSPORTATION
TRANSPORTATION
PRECAUTIONS WHEN TRANSPORTING
Always obey the traffic regulations when transporting the machine by road.
WARNING
This machine must be disassembled for transportation. When transporting the machine, please consult your Komatsu
distributor.
STEPS FOR TRANSPORTATION
As a basic rule, always transport the machine on a trailer.
When selecting the trailer, see the weights and dimensions given in "SPECIFICATIONS (PAGE 5-2)".
Note that the specifications for the weights and dimensions for transportation differ according to the type of tires and
type of dump body.
METHOD OF SECURING MACHINE
After loading the machine in the specified position, secure it in place as follows.
1.
Set the parking brake valve lever to the PARKING position to
apply the parking brake.
2.
Turn the key in the starting switch to the OFF position to stop
the engine.
3.
Remove the key from the starting switch.
4.
To prevent the machine from moving during transportation,
insert blocks under the front and rear of each tire and secure
the machine firmly in position with chains or wire rope.
Be particularly careful to secure the machine firmly so that it
does not slide to the side.
NOTICE
Always retract the antenna and reassemble the mirrors so that they are
within the width of the machine.
3 - 107
To Next Page
Loading...
Need help?
General
