.
SAFETY
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTENANCE
PROTECTION AGAINST FALLING, FLYING, INTRUDING OBJECTS
On jobsites where there is a hazard that falling objects, flying
objects, or intruding objects may hit or enter the operator's cab,
consider the operating conditions and install the necessary guards
to protect the operator.
When operating on jobsites, such as mines or quarries, where
there is a hazard of falling rocks, install FOPS and a front guard,
and always keep all the windows and doors closed when
operating. In addition, always check that there is no one except
the operator in the surrounding area. They may be hit by falling
objects or flying objects.
When carrying out demolition or breaker operations, install a
front guard and always keep all the windows closed when
operating. In addition, always check that there is no one except
the operator in the surrounding area. They may be hit by falling
objects or flying objects.
If, furthermore, the machine is used for standard operations, it is
also necessary to install additional guards, depending on the
prevailing conditions at the jobsite.
In such a case, do not operate the machine without an additional
guard. Be sure to consult with your Komatsu distributor about
necessary guards.
2 - 18
To Next Page
Loading...
Need help?
General
