Komatsu PC58UU-3 User Manual

GENERAL SPECIFICATIONS
01-4 PC58UU-3
SPECIFICATIONS
Machine Model PC58UU-3
Serial Number 20001 – 22000
Specifications Canopy specification Cab specification
Buket capacity (SAE) m³ 0.22 0.22
Operating weight kg 5,230 [5,330] 5,290 [5,390]
Performance
Working ranges
Max. digging depth mm 4,000 4,000
Max. vertical wall depth mm 2,900 2,900
Max. digging reach mm 5,660 5,660
Max. reach st ground level mm 5,565 5,565
Max. digging height mm 6,330 6,330
Max. dumping height mm 4,600 4,600
Bucket offset amount
(left/right)
mm 910/730 910/730
Max. blade lifting amount mm 400 400
Max. blade lowering amount mm 270 270
Max. digging force (bucket) kN {kg} 39.2 {4,000} 39.2 {4,000}
Swing speed rpm 10.0 10.0
Swing max. slope angle deg. 13 13
Travel speed (Low/High) km/h 2.7/4.5 [2.5/4.2] 2.7/4.5 [2.5/4.2]
Gradeability deg. 30 30
Ground Pressure kPa {kg/cm²}
30.4 {0.31}
[31.4 {0.32}]
30.4 {0.31}
[31.4 {0.32}]
Dimension
Overall length (for transport) mm 5,335 5,335
Overall width mm 2,000 2,000
Overall width of track mm 2,000 2,000
Overall height (for transport) mm 2,625 [2,610] 2,625 [2,610]
Overall height mm 2,625 [2,610] 2,625 [2,610]
Ground clearance of counterweight mm 645 [630] 645 [630]
Min. ground clearance mm 335 [320] 335 [320]
Tail swing radius mm 1,035 1,035
Min. swing radius of work equipment
(when offset is 0)
mm 1,060 1,060
Height of work equipment at min. swing
radius
mm 4,720 [4,705] 4,720 [4,705]
Distance between centers of idler and
sprocket
mm 1,910 [1,940] 1,910 [1,940]
Track gauge mm 1,600 1,600
Overall length of track mm 2,470 2,470
Machine cab height 1,560 [1,545] 1,560 [1,545]
Blade width x height 2,000 x 400 2,000 x 400
★ The values shown in the [ ] are those for the road liner shoe specification.
(5)

Komatsu PC58UU-3 Specifications

General

Brand	Komatsu
Model	PC58UU-3
Category	Construction Equipment
Language	English