DISASSEMBLY AND ASSEMBLY ENGINE AND WORK EQUIPMENT PUMP ASSEMBLY
30-12
PC58UU-3
2
12
9. Remove the clamps from the electrical har-
ness (19). Loosen the clamps on the air intake
hoses (20) and (21) and disconnect the hoses.
Remove the air cleaner (54) and remove
brackets (55) and (56).
10. Remove the radiator reservoir tank (22) with
its bracket. Remove the fan guard (23) mount-
ing bolt and remove the guard. Remove the
fan (24) mounting bolt and remove the fan.
11. Loosen the upper radiator hose (25) and the
lower radiator hose (26) clamps from the radi-
ator on the engine side and disconnect the
hoses. Remove the intermediate clamp (27)
of the lower hose.
12. Loosen the ground cable (28) mounting bolt
from the engine and disconnect it.
13. Disconnect the electrical harness and remove
the connectors and harnesses from the work
equipment pump solenoid (29), the engine
speed sensor (30), the fuel pump, the stop
motor, the air heater, the oil pressure gauge,
etc.
To Next Page
Loading...
