OPERATION OPERATION
3-68
OPERATIONS AND CHECKS BEFORE STARTING ENGINE 3
WARNING
Before starting the engine, check that the safety lock lever is securely at the LOCK position.
If the work equipment control lever is touched by accident when starting the engine, the work equipment
may move unexpectedly and cause serious damage or personal injury.
1. Check that parking brake lever (1) is at the LOCK position.
2. Check that directional lever (2) is at the N position.
REMARK
If directional lever (2) is not set to the N position, the engine will
not start.
When directional selector switch actuation switch (3) is ON, the
engine will not start if directional lever (2) and directional selec-
tor switch (4) are not both at the N position.
To Next Page
Loading...
Need help?
General
