OPERATION OPERATION
3-77
MOVING THE MACHINE (DIRECTIONAL, SPEED), STOPPING THE MACHINE3
WARNING
q Always remove the safety bar for travel operations. If it is not removed, the steering wheel cannot be
used for steering, and this may lead to serious damage or injury.
q When moving the machine, check that the area around the machine is safe, then sound the horn
before starting.
q Do not allow people to get near the machine.
q Clear the machine's travel path of any obstacle.
q Pay particular attention to the blind spot at the rear of the machine when traveling in reverse.
MOVING THE MACHINE 3
1. Check that caution lamp (1) is not lighted up.
2. Check that the work equipment control lever is at the
HOLD position, then set safety lock lever (2) to the FREE
position.
To Next Page
Loading...
Need help?
General
