EXPLANATION OF COMPONENTS OPERATION
3-16
If the steering oil pressure goes down during operation, the
steering oil pressure caution lamp and central warning lamp
light up and the alarm buzzer sounds intermittently.
At the same time, “E03 CALL“ and “CHECK RIGHT NOW“ are displayed on the character display in turn, so stop
the machine immediately in a safe place, then stop the engine and carry out inspection.
CAUTION ITEMS 3
CAUTION
If these lamps light up, stop operations quickly and carry out the following action.
AXLE OIL TEMPERATURE CAUTION LAMP
This lamp (1) lights up to warn the operator that the brake oil
temperature has risen.
During checks before starting (when the starting switch is
turned to the ON position but the engine is not started), this
monitor does not light up.
During operation (engine running)
In continuous heavy-duty operations or when traveling long dis-
tances downhill where the brake is used frequently, the axle oil
temperature becomes high, so the axle oil temperature caution
(1) Axle oil temperature caution lamp (4) Engine cooling water temperature caution lamp
(2) Parking brake reminder caution lamp (5) Fuel level caution lamp
(3) HST oil temperature caution lamp
To Next Page
Loading...
Need help?
General
