.
OPERATION
EXPLANATION OF COMPONENTS
CAP WITH LOCK
The fuel tank filler port and the hydraulic tank filler port (if equipped) are equipped with locks.
Use the starting switch key to open and close the cap.
METHOD OF OPENING AND CLOSING CAP WITH LOCK (FOR THE FUEL TANK FILLER PORT)
TO OPEN THE CAP
1.
Insert the starting switch key into the cap as far as it will go (to
the shoulder).
If the starting switch key is turned before it is inserted all the
way, it may break.
2. Turn the starting switch key clockwise, align the match mark on
the cap with the rotor groove, then remove the cap.
TO LOCK THE CAP
1.
Screw the cap into place.
2. Turn the key counterclockwise and take the key out.
3 - 56
To Next Page
Loading...
Need help?
General
