.
SAFETY
PRECAUTIONS FOR OPERATION
OPERATION
CHECKS BEFORE OPERATION
When carrying out the checks, move the machine to a wide area where there are no obstructions, and operate
slowly. Do not allow anyone near the machine.
Always fasten your seat belt.
Check the operation of travel, steering and brake systems, and
work equipment control system.
Check for any problem in the sound of the machine, vibration,
heat, smell, or gauges; check also that there is no leakage of oil
or fuel.
If any problem is found, carry out repairs immediately.
Before driving the machine or starting operations, check that
frame lock bar (1) is securely fixed at the FREE position.
PRECAUTIONS WHEN TRAVELING IN FORWARD OR REVERSE
Before travelling, check again that there is no one in the surrounding area, and that there are no obstacles.
Before travelling, sound the horn to warn people in the area.
Always operate the machine only when seated.
Do not allow anyone apart from the operator to ride on the machine.
Check that the backup alarm (alarm buzzer when machine travels in reverse) works properly.
Always lock the door and windows of the operator's compartment in position (open or closed).
On jobsites where there is a hazard of flying objects or of objects entering the operator's compartment, check that
the door and windows are securely closed.
If there is an area to the rear of the machine which cannot be
seen, position a signal person. Take special care not to hit other
machines or people when turning or swinging the machine.
Always be sure to carry out the above precautions even when the
machine is equipped with mirrors.
2 - 22
To Next Page
Loading...
Need help?
General
