.
OPERATION
OPERATION
MOVING THE MACHINE (DIRECTIONAL, SPEED), STOPPING THE MACHINE
WARNING
Always remove the frame lock bar for travel operations. If it is not removed, the steering wheel cannot be used for steering,
and this may lead to serious damage or injury.
When moving the machine off, check that the area around the machine is safe, then sound the horn before starting.
Do not allow people to get near the machine.
Clear the machine's travel path of any obstacle.
Pay a particular attention to the blind spot at the rear of the machine, when traveling the machine in reverse.
When starting the machine off up a slope, set the transmission cut-off switch to the OFF position, depress the left brake pedal.
Then depress the accelerator pedal and gradually release the brake pedal to start the machine off. This makes it possible to
prevent the machine from rolling back.
MOVING THE MACHINE
1.
Check that caution lamp (1) is not lighted up.
3 - 113
To Next Page
Loading...
Need help?
General
