.
SAFETY
PRECAUTIONS FOR OPERATION
PRECAUTIONS WHEN TRAVELING
Never turn the key in the starting switch to the OFF position. It is dangerous if the engine stops when the machine
is traveling, because the steering becomes heavy. If the engine stops, depress the brake pedal immediately to
stop the machine.
When traveling on level ground, keep the work equipment at
height of 40 to 50 cm (16 to 20 in) from the ground.
When traveling, do not operate the work equipment control
levers. If the work equipment control levers have to be operated,
stop the machine first, then operate the levers.
When traveling on rough ground, travel at low speed and do not operate the steering suddenly. There is danger
that the machine may turn over. The work equipment may hit the ground surface and cause the machine to lose
its balance, or may damage the machine or structures in the area.
Avoid traveling over obstacles when possible. If the machine has to travel over an obstacle, keep the work
equipment close to the ground and travel at low speed. Never travel over obstacles which make the machine tilt
strongly to one side.
When traveling or carrying out operations, always keep a safe distance from people, structures, or other
machines to avoid coming into contact with them.
When passing over bridges or structures, check first that the structure is strong enough to support the weight of
the machine. When traveling on public roads, check first with the relevant authorities and follow their instructions.
When operating in tunnels, under bridges, under electric wires, or other places where the height is limited, operate
slowly and be extremely careful not to let the machine body or work equipment hit anything.
Always obey the traffic regulations when traveling on public roads. This machine travels at a lower speed than
normal automobiles, so keep to the side of the road and be careful to leave the center of the road free for other
vehicles.
If you drive the machine at high speed continuously for a long time, the tires will overheat and the internal pressure
will become abnormally high. This may cause the tires to burst. If a tire bursts, it produces an extremely large
destructive force, and this may cause serious injury or accident.
If you are going to travel continuously, please consult your Komatsu distributor.
2 - 23
To Next Page
Loading...
Need help?
General
