3.2 Explanation of components Operation
3-36 WA470-6H – VEAM946100
Reset method for filter, oil replacement time
The filter and oil replacement time is displayed on the character
display, so if the filter and oil have been replaced, reset the filter
and oil change time.
1. Press the (&) of monitor panel mode selector switch 1, and
display the odometer.
2. Press (>) or (<) of monitor panel mode selector switch 2 and
display “MAINTENANCE MONITOR“.
3. Press the (&) of monitor mode selector switch 1. The screen
switches to the display shown on the right.
The bottom line shows two items: the replacement time on
the left and the total number of times the item has been
replaced on the right.
4. Press the (>) or (<) of monitor panel mode selector switch 2
to display the item (filter or oil) which has reached the
replacement time.
5. Press the (&) portion of the character display mode selector
switch. The screen switches to the display shown on the
right.
“RESET“ and “ITEM TO RESET“ are displayed on the top
line in turn.
6. When resetting the replacement time, press (>) or (<) of
monitor panel mode selector switch 2, align the cursor with
“YES“, then press (') of machine monitor mode selector
switch 1. It will reset and return to the previous screen.
To abort, align the cursor with “NO“, then press (') of moni-
tor panel mode selector switch 1.
7. When resetting the replacement time for another item, carry
out the procedure from Step 4. After completing, press (')
of monitor panel mode selector switch 1 twice or turn the
starting switch OFF.
ODO ><
1234.5 KM
'
MAINTENANCE ><
MONITOR
'&
03:FUEL FILT ><
1000H: 99
'&
RESET
Y ES <> NO
'
ENT RE
RESET
Y ES <> NO
'
ENT RE
To Next Page
Loading...
Need help?
General
