3.2 Explanation of components Operation
3-66 WA470-6H – VEAM946100
3.2.7 Towing pin
1. Insert towing pin (1) into hole (2) in the counterweight.
2. Use linch pin (3) to set so that the towing pin does not come
out.
Reverse this operation to remove the pin.
3.2.8 Grease pump
The grease pump is stored inside the toolbox on the front left of
the rear frame. After using the pump, wipe off all the grease from
the outside of the pump and stow the pump in the toolbox.
1. Turn the grease pump so that lever (2) of grease pump (1)
faces the outside of the machine.
2. Using the bottom of grease pump (1) as the fulcrum, tilt
grease pump (1) towards you and remove it from holder (3).
3. Lift grease pump (1) up and remove it from the grease box.
4. When stowing the grease pump away, carry out the above
Steps 1 - 3 in the opposite order.
GK038042
1
2
GK038043
3
GK047009
GK047010
1
2
3
To Next Page
Loading...
Need help?
General
