Attachments, Options 6.4 Joystick steering system
WA470-6H – VEAM946100 6-17
6.4.3 Operation method of joystick steering system
WARNING
! It is dangerous to turn the machine suddenly at high speed,
or to turn on steep hills. Do not operate the steering in such
conditions.
! When turning, the articulation stops at the position where the
steering wheel is turned to, but if the joystick is held in the
tilted position, the body will articulate fully.
! The feeling when operating the steering with the joystick is
different from when operating with the steering wheel, so be
extremely careful until you have become used to operating
the joystick.
Check the adjustment and operation before starting the engine.
For details, see "Check before starting engine, adjust (3-88)".
1. Before starting the engine, check the operation of the joy-
stick lever steering, check that the transmission directional
lever is at N, and that the surrounding area is safe.
REMARK
Under the following conditions, a warning may be given when
the engine is started.
! If the FNR switch on the joystick is at F or R, the joystick pilot
lamp flashes, the central warning lamp lights up, and the
alarm buzzer sounds.
! At the same time, “E00 J/S SW NEUTRAL“ is displayed on
the character display. In this condition, the engine will not
start, so set the FNR switch to N.
! If the joystick is not at the N position, the joystick pilot lamp
flashes, the central warning lamp lights up, and the alarm
buzzer sounds.
! At the same time, “E00 J/S LEVER POSI“ is displayed on
the character display. In this condition, the engine will not
start, so set the joystick to the N position.
2. Press the (a) part of the joystick ON/OFF switch to turn it
ON.
GK043144
F
N
R
GK043186
ab
To Next Page
Loading...
Need help?
General
