3.3 Operation Operation
3-144 WA470-6H – VEAM946100
3.3.13 Checks after completion of operation
Before stopping engine
Check the engine water temperature, engine oil pressure, torque
converter oil temperature, and fuel level with the machine moni-
tor.
If the engine has overheated, do not stop it suddenly. Run the
engine at a midrange speed to allow the engine to cool down
before stopping it.
After stopping engine
1. Walk around the machine and check the work equipment,
body work, and undercarriage, and check also for oil and
water leakage.
2. Fill the fuel tank.
3. Check the engine compartment for paper and debris. Clean
out any paper and debris to avoid a fire hazard.
4. Remove any mud affixed to the undercarriage.
To Next Page
Loading...
Need help?
General
