Foreword 1.3 Introduction
WA470-6H – VEAM946100 1-7
1.3 Introduction
This loader is a machine with independent transmission, moving
on chains or wheels. Driving in forward direction, the loader can
load or dig material using its attachments intended for loading
operations (i.e. bucket).
This KOMATSU machine is designed to be used mainly for the
following work:
! Digging work
! Smoothing
! Pushing work
! Loading work
For details of the operating procedure, see "Work possible using
wheel loader (3-130)".
1.3.1 Intended use
If you use the machine for any other purpose than specified
above, we will not accept any responsibility for safety. All consid-
erations concerning safety will then be up to the owner or the
operating and maintenance personnel. In any case, neither you
nor any other person are/is authorised to perform work and func-
tions explicitly prohibited in these operating instructions.
The transport of persons in the work equipment is strictly
forbidden!
For details of the operating procedure, see "Work possible using
wheel loader (3-130)".
To Next Page
Loading...
Need help?
General
