2.2 General precautions Safety
2-8 WA470-6H – VEAM946100
Fire extinguisher and first aid kit
Always follow the precautions below to prepare for action if any
injury or fire should occur.
! The fire extinguisher can be fastened to the inside cabin wall
on the left.
! If, in the course of certain operations, there is danger of fire,
fire extinguishers must be at hand. Familiarise with the use
of the fire extinguishers.
! Inform yourself on measures to be taken in the event of a
fire.
! The first-aid kit can be positioned on the right of the cabin's
interior.
! Make sure that you know all telephone numbers of the per-
sons that you need to contact in an emergency.
Safety features
! Be sure that all guards and covers are in their proper posi-
tion. Have guards and covers repaired immediately if they
are damaged.
! Understand the method of use of safety features and use
them properly.
! Never remove any safety features. Always keep them in
good operating condition.
Keep machine clean
! If water gets into the electrical system, there is a hazard that
it will cause malfunctions or misoperation. Do not use water
or steam to wash the electrical system (sensors, connec-
tors).
! If inspection and maintenance is carried out when the
machine is still dirty with mud or oil, there is a hazard that
you will slip and fall, or that dirt or mud will get into your
eyes. Always keep the machine clean.
GK032032
Fastening points
GK032033
GK032034
To Next Page
Loading...
Need help?
General
