SAFETY MEASURES DURING MAINTENANCE
3-25
DURING MAINTENANCE
ATTACHMENTS
Attachments removed from the machine must be stored in a safe
location and in such a way that they cannot tip over.
Caution - risk of injury!
WORKING UNDER THE MACHINE
• Always lower all movable work units onto the ground or set
them to their lowest positions before you start to perform
maintenance or repair measures under the machine.
• Block the wheels of the machine using wheel chocks.
• Do not work under a machine that is not appropriately sup-
ported.
KEEPING THE MACHINE CLEAN
• Always keep the machine clean and tidy.
• Oil, grease, and tools lying around involve danger, since
they may cause slipping or tripping over.
• Do not clean sensors, plugs, and the interior of the driver's
cab with water or steam. If water seeps into the electric sys-
tem, there is danger of uncontrolled and unintentional move-
ment of the machine which may cause accidents.
SPECIFIC MEASURES
Always wear appropriate safety clothes and safety goggles when
you perform grinding, welding, use a sledge hammer or perform
similar work.
To Next Page
Loading...
Need help?
General
