3-42 bizhub 658e/558e/458e/368e/308e
Fax function
3
3.3
Preparation flow
The following describes a preparation flow to send a fax from a computer. For details, refer to the relevant
page.
This preparation is not required the second time or subsequent times.
1 Checking the cable connection (Administrator)
% Check that this machine is correctly connected to the telephone line and network cable. For details,
refer to page 3-42.
2 Checking network settings of this machine (Administrator)
% Check the network settings of this machine. For details, refer to page 3-43.
You can use this function with the default settings unless otherwise requested.
3 Installing the fax driver on your computer
% Installing the fax driver on your computer For details, refer to page 3-43.
Operation flow
The following describes a flow to send a fax. For details, refer to page 3-44.
1 Creating data
% Create data to be sent using application software.
2 Configuring the fax driver
% Select a fax driver, and change the setting if necessary.
3 Entering a destination to send data
% Enter a destination to send data.
Checking the cable connection
1 Check that a modular cable is connected to the LINE port of this machine.
2 Check that a LAN cable is connected to the LAN port of this machine and the green LED is on.
To Next Page
Loading...
Need help?
General
