2-10 bizhub 658e/558e/458e/368e/308e
About this machine
2
2.3
List of other optional components
The following options are built into this machine and are not shown in the figure.
25 Finisher FS-536 SD Sorts, groups, staples, folds, and binds printed paper before output-
ting it.
To install the Finisher FS-536 SD, the Relay Unit RU-513 is required.
Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cab-
inet PC-115, or Paper Feed Cabinet PC-215 must be installed on
this machine.
The Finisher FS-536 contains the Saddle Stitcher.
26 Punch Kit PK-520 Install this unit onto the Finisher FS-536/FS-536 SD.
This unit supports the punching function.
27 Relay Unit RU-513 This unit is required to install the Finisher
FS-537/FS-537 SD/FS-536/FS-536 SD on this machine.
28 Finisher FS-537 SD Sorts, groups, staples, folds, and binds printed paper before output-
ting it.
To install the Finisher FS-537 SD, the Relay Unit RU-513 is required.
Also, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cab-
inet PC-115, or Paper Feed Cabinet PC-215 must be installed on
this machine.
The Finisher FS-537 contains the Saddle Stitcher.
29 Finisher FS-537 Sorts, groups and staples printed paper before outputting it.
To install the Finisher FS-537, the Relay Unit RU-513 is required. Al-
so, Desk DK-510, Paper Feed Cabinet PC-415, Paper Feed Cabi-
net PC-115, or Paper Feed Cabinet PC-215 must be installed on this
machine.
30 Punch Kit PK-523 Install this unit onto the Finisher FS-537/FS-537 SD.
This unit supports the punching function.
31 Z Folding Unit ZU-609 Install this unit onto the Finisher FS-537/FS-537 SD.
This unit supports the Z-fold function.
32 Post Inserter PI-507 Install this unit onto the Finisher FS-537/FS-537 SD.
This unit allows you to insert cover sheets into the copied or printed
sheets. This unit also allows you to manually operate the finisher (only
the lower tray is available).
33 Job Separator JS-602 Install this unit onto the Finisher FS-537/FS-537 SD.
This unit sorts printed sheets.
No. Name Description
No. Name Description
1 Stamp Unit SP-501 Stamps a scanned original when sending a fax. This unit allows you
to check that the original has been scanned.
2 Spare TX Marker
Stamp 2
A replacement stamp for the Stamp Unit SP-501.
3 Local Interface Kit
EK-609
Install this unit when using the connection function with a Bluetooth
LE-compatible iOS terminal.
The USB port and receiving device for Bluetooth LE communication
are added.
For details on the association with an iOS terminal, refer to the User's
Guide CD/DVD.
4 i-Option LK-102 v3 Supports the PDF processing function that is one of the advanced
functions.
5 i-Option LK-105 v4 Supports the searchable PDF function that is one of the advanced
functions.
6 i-Option LK-106 Used to add a bar code font that is one of special fonts.
7 i-Option LK-107 Used to add a unicode font that is one of special fonts.
8 i-Option LK-108 Used to add an OCR font that is one of special fonts.
In the standard, the OCR-B font (PostScript) is available. Installing the
i-Option LK-108 allows use of the OCR-A font (PCL).
To Next Page
Loading...
Need help?
General
