Konica Minolta Di2010 User Manual

6
6.1 Administrator Management Screens
6-2 Di2010/Di2510/Di3010/Di3510
Administrator Management Operations Chapter 6
6.1 Administrator Management Screens
To display the Administrator Management screens
This explains the method for displaying the Administrator Management screens.
1 Press the [Utility] key.
2 Touch [Admin. Management].
3 Use the 10-Key Pad to type in the
8-digit administrator code (Admin.
Password).
✎
Note
If the administrator code (Ad-
min. Password) is incorrectly
entered, the message “Incor-
rect administrator code. Try
again.” appears accompanied
by a beeping sound. Follow the
instructions in the message that appears and type in the correct administra-
tor code.
If the administrator code (Admin. Password) is incorrectly entered three
times, the message “The Admin. Code is now disable due to unauthorized
access cannot Admin. Mode.” appears, access to Administrator mode is de-
nied, and the password will not be accepted. To allow access to Administra-
tor mode, turn the machine off, then on again.
Keep the administrator code (Admin. Password) in a safe place hidden from
the general user.

Konica Minolta Di2010 Specifications

General

Brand	Konica Minolta
Model	Di2010
Category	Copier
Language	English