Konica Minolta Di2010 User Manual

5
5.3 Changing Default Settings
5-30 Di2010/Di2510/Di3010/Di3510
Utility Mode Operations Chapter 5
To set the “Density (ADF only)” function (Only when the duplexing document
feeder is installed)
This function is used to adjust the density level when the optional duplexing
document feeder is used.
1 Press the [Utility] key.
2 Touch [User’s Choice].
3 Touch [6/6], and then touch
[Density (ADF only)].
4 Select the desired default setting, and then touch [Enter].
1: The setting on the left is most appropriate for scanning normal documents
(such as those created with a word processor).
2: The setting on the right is most appropriate for scanning faint document (such
as those written with pencil).
5 Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.
12

Konica Minolta Di2010 Specifications

General

Brand	Konica Minolta
Model	Di2010
Category	Copier
Language	English