10
Introduction
Term description
The meanings of terms used in this operation manual are as follows:
Terms Explanation
DR Detector
Collective term indicating AeroDR 1417HQ, AeroDR 1417S, AeroDR 1717HQ,
AeroDR 1012HQ, AeroDR 2 1417HQ, AeroDR 2 1417S, AeroDR 3 1417HD,
AeroDR 3 1717HD and AeroDR 3 1012HQ.
Image processing controller The CS-7 or ImagePilot is referred to as the image processing controller.
Calibration Processing for calibrating the characteristics of the DR Detector for each pixel.
PoE An abbreviation for Power over Ethernet. Provides power using an Ethernet cable.
Aero Sync
This is a mode in which exposure is performed without being synchronized with the X-ray
device.
Aero Storage This function allows you to expose without using the image processing controller.
Access Point
Collective term indicating the AeroDR Access Point and general-purpose access points.
The AeroDR Access Point 2 is included.
I/F Cable
Collective term indicating the AeroDR I/F Cable (10 m/20 m), AeroDR I/F Cable2 (10 m/20 m),
I/F Cable3 8mD, I/F Cable3 8mU, I/F Cable3 0.67mU, I/F Cable4 8mD and I/F Cable4 8mU.
Wired cable Collective term indicating I/F Cable and AeroDR UF Cable.
Serial exposure
An exposure method to capture multiple frame images serially taken by the pulse irradiation
from an X-ray generator device.
To Next Page
Loading...
Need help?
General
