Konica Minolta SKR 3000 User Manual

3.3 Charging of DR Detector
80
3.3.3 Charging with the wired
cable
Connecting the wired cable to the DR Detector per-
forms charging of the DR Detector.
1
Confirm that the devices with I/F cables
connected are turned on.
2
Securely connect the wired cable to the
wired connection connector on the DR
Detector. Once it is connected, the DR
Detector will start charging.
or
3
Once the battery level of the DR Detector
becomes 10 % or higher, the LED on the
DR Detector changes as follows.
DR Detector
Battery
level
LED
Lighting
pattern
AeroDR 1417HQ,
AeroDR 1417S,
AeroDR 1717HQ,
AeroDR 1012HQ,
AeroDR 2 1417HQ,
AeroDR 2 1417S
10 % or
more
LED (blue) O󰀨
AeroDR 3 1417HD,
AeroDR 3 1717HD,
AeroDR 3 1012HQ
Battery
LED (blue)
O󰀨
HINT
•••••••••••••••••••••••••••••••••••••
• Conrm completion of full charge and the level of bat-
tery power with the image processing controller.
• If there is any problem during charging, an error is
displayed on the DR Detector. Also, charging will stop
when an error occurs.
•••••••••••••••••••••••••••••••••••••••••••••••••••••

Konica Minolta SKR 3000 Specifications

General

Brand	Konica Minolta
Model	SKR 3000
Category	Measuring Instruments
Language	English