Krone EasyCut F 360 User Manual

2 Safety
2.4 Basic safety instructions
14
EasyCut F 320 M
Original Operating Instructions 150000808_01_en
2.4.3 Personnel qualification of the technicians
If the work (assembly, conversion, modification, extension, repairs, retrofitting) is performed
improperly on the machine, people may be seriously or fatally injured. To avoid accidents,
everyone who performs work according to these instructions must meet the following minimum
requirements:
• Qualified professional, with relevant training.
• Capable of assembling the (partially) disassembled machine according to the assembly
instructions provided by the manufacturer.
• Capable of extending, modifying or repairing the function of the machine according to the
relevant instructions provided by the manufacturer.
• Ability to perform the work safely according to these instructions.
• Understands the mode of operation of the work to be performed and the machine and is
able to identify and avoid risk in carrying out the necessary work.
• Has read these instructions and is able to implement the information explained in these
instructions accordingly.
2.4.4 Children in danger
Children are not in a position to assess dangers and behave unpredictably.
Thus children are particularly at risk.
 Keep children away from the machine.
 Keep children away from consumables.
 Make sure that there are no children in the danger zone, especially when starting and
triggering machine movements.
2.4.5 Connecting the machine
When tractor and machine are not correctly connected, there is a risk of causing serious
accidents.
 When connecting, observe all the operating instructions:
• The operating instructions of the tractor
• The operating instructions of the machine, refer to page38
• The operating instructions of universal shaft
 Observe the changed driving behaviour of the combination.
2.4.6 Structural modifications on the machine
Structural changes and enhancements may impair the functionality and operational safety of the
machine. People may be seriously injured or killed as a result.
Structural changes and enhancements are not permitted.
2.4.7 Additional equipment and spare parts
Additional equipment and spare parts that do not correspond to the requirements of the
manufacturer may affect the operational safety of the machine and cause accidents.
 To ensure operational safety, use original parts or standard parts which correspond to the
requirements of the manufacturer.

Krone EasyCut F 360 Specifications

General

Brand	Krone
Model	EasyCut F 360
Category	Lawn Mower
Language	English