Krone EasyCut F 360 User Manual

Maintenance - Cutterbar 14
Checking/replacing cutting discs/mower drums 14.6
EasyCut F 320 M
Original Operating Instructions 150000808_01_en 77
KM000-091
Æ If the contour of the blade carrier (2) protrudes completely beyond the contour of the gauge
(1) in section (IC), the wear limit of the blade carrier (2) is not reached.
Æ If the contour of the blade carrier (2) disappears at any point in section (IIC) behind the
contour of the gauge, the wear limit of the blade carrier (2) is reached. The blade carrier (2)
must be replaced.
14.6 Checking/replacing cutting discs/mower drums
WARNING
Deformed cutting discs/mower drums
If cutting discs/mower drums are deformed, blades may become detached due to high
rotating speed. As a result, people may be seriously injured or killed.
 The cutting discs/mower drums must be checked at least once a day or after contact with
foreign objects.
 If cutting discs/mower drums are deformed, the dimension X=48mm must not be
exceeded.
 The cutting discs/mower drums must only be replaced by KRONE original spare parts.
KM000-042

Krone EasyCut F 360 Specifications

General

Brand	Krone
Model	EasyCut F 360
Category	Lawn Mower
Language	English